Four (4) Channel Fail Safe Module

Four (4) Channel Fail Safe Module

Fail Safe sequence module, Power, Carrier failure or end of transmission control
Comply with FCC part 15.247 sub E on Continuous transmission timing

OPERATION:  Transmitter sends an interval pulse as long as the input is activated by a control, switch or sensor etc. The Receiver at the other end  turns the output ON decodes the interval to verify the status of the transmitter, If The Transmitter, Finalize the control action, loss of power or carrier, then The receiver decoder will acknowledge and  turn the Receiver output OFF  until the signal is activated again

9FS4   Receiver Module

Operating voltage 12VDC
Input:  Dry Contact
Output:  8A SPST
Enclosure Weatherproof IP65,  9x9x4 inches

NOTE: Transmitter or  receiver not supplied,