Additional information
| Weight | 1.843 oz |
|---|---|
| Dimensions | 25.4 × 15.24 × 12.7 in |
Shop
Migro Xtended Range Set Handheld Set-MXTH, MXR & (1) Short Range MX Antenna
$949.99
Part# MXT-4
**Additional Transmitter ONLY works with other MX Products**
Applications
Industrial Monitoring, Pump control, Monitor remote instruments, sensors, Lighting control, Packing and mobile system, PLC remote, SCADA,
Factory process control, Alarms, Generators, Solar, Wire replacement.
Performance
| Up to 10 Km of line-of-sight range with MXT4 Up to 3 Km with handheld device MXT4H Migro Encoding/Decoding technology Four (4) Independent Channels Output mode selection: Latch or Momentary Shielded Metal case NEMA4 – IP65 Antenna 931501 or 931487 (not included) Power: 12 VDC – Solar Ready Dip Switch 12 Bit Code setting Optional repeater if necessary Multiple Transmitters and Receivers Factory pre-configured system, Ready No setup or programming required No fees from carriers, No hacking No software or internet Not limited to line-of-sight communication |
Out of stock
Specifications MXT
Specifications Digital Transmitter MXT-4
| Supply power | 12VDC / 8Watt, Standby 1mA, TX 1200mA |
| Inputs | N/O Normally Open, digital dry contact |
| Transmitter power | per FCC Part 15.249, 50mV/m @ 3m |
| Frequency | 154MHz • License free MURS band |
| Transmission | Digital EncodedGaussian_frequency-shift_keying |
| Channels | 16 addresses per system GFSK |
| Input Wiring | Terminals, Dry Contact |
| Response | Loop 500 msec |
| Weight | 5.36lb ( 2.44kg ) each unit |
| Dimensions | NEMA4, IP65-6.73″ W x4.76″ H x 2.17″ D |
Specifications MXR
Specifications Digital Reciever MXR-4
| Supply power | 12VDC / 5Watt |
| Output | Relay 8Amp,SPDT (NO/NC) Class 2 Pilot Duty |
| Output mode | N/A |
| Configuration | DIP switch factory preset |
| Compliance | FCC CFR part 15.247, 95 sub E |
| Wiring | Screw Terminals |
| Antenna Z | 50 Ohm, RF Connector SO-239 |
| Ambient temp | 14° to 140° F (-10° to 60° C) |
| Enclosure | NEMA4, IP65-6.73″ W x4.76″ H x 2.17″ D |
Specifications HandHeld Transmitter – MX-4H
| Supply power | 2 x 9VDC Batteris Included |
| Output mode | (*) Momentary Latching (4 CH) |
| Configuration | DIP switch factory preset |
| Compliance | FCC CFR part 15.247, 95 sub E |
| Antenna | 931501 17″ Antenna Included |
| Antenna Z | 50 Ohm, RF Connector SO-239 |
